Your cart is empty.
Your cart is empty. Compatible:
--Miter Saw: DW712 Type 1 8-1/2, Type 2 8-1/2; DW715 Type 2; DW716 Type 1, Type 2, Type 3; DW718 Type 1, Type 2, Type 3; DW717(10").
--Compound Miter Saw: DW703 Type 1(10" ), DWS780 Type 1(12").
--Dual Bevel Miter Saw: DW706 Type 1(12" ).
--Crosscut Miter Saw: DW708 Type 4.
--Circular Saw:DW368 Type; DW369CS Type 1; DW368 Type 2, Type 3; DW369CS Type 2.
--Table Saw: DW744X Type 4, Type 5 (10"), Type 6 (10"); DW744XCDN Type 4 (10"); DW744XRSCDN Type 4 (10"); DW744XRS Type 4 (10"), Type 5 (10"), Type 6 (10").
How to use:
1. Open the cover of carbon brush and take out the carbon brushes.
2. Replace with the new carbon brush.
3. Lock the cover well.
Note:
These brushes better replaced every 60 hours.
This brush is compatible with the models listed, but it is not guaranteed to fit any other power tools.
Package Included:
2 x Carbon Brushes
Axor2
August 3, 2025
23 years oldDewalt miter saw
Robert S.
June 28, 2025
This is a pack of brushes - but not what's described. I have a DW machine on this list but it does not fit, the block is about 1/2 the size it needs to be, has a non insulated cable and a different terminal. What I got looks quite different to the picture of the item, see my photo. Maybe they picked the wrong item? But Amazon does not allow me to return it even within the return window - a write-off now
Wrong item sent and delivered to wrong property.
June 21, 2025
Had to do a little change on the ends, but it worked well after being installed.
Sergei
June 4, 2025
Came on time fit like original
Dr. Ian Turgeon
June 1, 2025
These are completely different.The brush on the bottom in the pic is what come out of my DW708. The brush above it beside the bag is what you get….No where even close to each other.I just read a review saying someone tried returning these and Amazon wouldn’t let them, I hope that’s not true. I will be trying for a return soon, right now I need a working Miter Saw.
Kubota Junkee
May 17, 2025
The brushes fit my Dewalt saw but have the wrong connectors, took a few minutes to replace with the correct connectors it wasn’t a huge issue just annoying more then anything, I didn’t receive anything close to the ones shown in the picture
Marcel
April 9, 2025
The brushes are supposed to fit a specific tool . They are not even close to the correct dimension. And now it says "Not eligible for return, unless damaged"
Customer
March 11, 2025
The item I bought does not fit the motor that I asked for but I can’t return due ti third party seller,had I was told this no way would I considered so goodbye Amazon.
addiction2bass
February 18, 2025
Works good so far. We shall see how long they last in time but I won’t be using the saw a lot so I’m sure they will last me a long time! The original ones lasted about 3 years at my job before the saw failed and they just bought a new one… I took the old one to try and repair it and it was a simple brush replacement and the chop saw is working perfectly again! :) I got me a pretty nice double bevel chop saw for the price of some brushes and some time. lol this makes two saws I’ve got from my job that tosses the saws thinking they was straight broken… which technically they was and still are a bit. But that’s user error damages. Got me a nice chop saw and a decent job site table saw. The table saw was alot worse condition. Took a lot more effort but new bearings and new brushes and it’s cutting like it used to. Only downfall is the adjusting screw is so gunked up it doesn’t work very well. But still a 30$ repair for a fair working saw is a great deal lol don’t worry my job got its money worth outta these old tools! Price they pay for tools beat on so hard all the time.
KatieandJan
December 9, 2024
Just when I thought I will finally get a new mitter saw, I fixed the old one under $10 and 5min of work. Thank you, fits my 13y old 12” dewaltUpdate: brushes are useless after a few months of light use, sparks visible from the beginning…buy better quality
S.J. O.
November 19, 2024
Spade had to be spread some to fit, works fine otherwise.
Jeremy And Layna
October 31, 2024
My SCMS was dead in the water, it wouldn't even turn on. The light worked, so I knew the saw had power, but the motor wouldn't even turn on. I was worried it may have been a bad switch, but I thought brushes would be the much faster and cheaper thing to fix. These brushes arrived in 1 day, and it took less than 5 minutes to replace the old brushes. They were an exact swap. No springs needed for the DWS780. Once these new brushes were in place, the saw worked perfectly once again. I'm happy for a very cheap and very quick fix to an expensive tool.
J Brent
October 28, 2024
Would have been nice if I wouldn't have had to disassemble the table saw to install these, but that's life! They work well. Had a little wear in odor but after a day or so, no more odor. All works well!
Recommended Products
