Your cart is empty.
Your cart is empty.
Extra Large Cat Door Specifications
Note:
Outer Size: 9.8" x 11" x 0.94"(W x H x D);
Inner size: 7.9" x 8.7"(W x H);
Cut-Out Size: 8.3" x 9.5" (W x H);
Fit Cats up to 25.54 lbs (The waistline less than 24.8" );
Material: ABS plastic
Color: White
Style: Flap
Weight: 1.04 lbMake sure that the width and height(shoulder level) of the pet are inferior to the pet screen door, thanks.
The depth of window/glass/metal door you are going to install to had better less than the depth 0.47", so as to screw in 4 screws from one sides easily.
Package Includes of Nexsol Extra Large Car Door :
1 X Large Cat flap door
4 X Screws
4 X Nut
8 X Screw caps
1 X Installation instructions
1. Draw outline on the paper board
Draw the cat door frame on a paper board and cut it down.
Note:
You had better prepare these necessary tools first, pencil, ruller, electric saw, drill, screwdriver, double-side tape.
2. Draw outline on the glass door
Use a pencil draw around the edge of the cut paper on the glass door you want to be fixed to.
Note:
Generally, average installation height is around 10-15 cm from the floor.
3. Drill 4 corners for holes
Drill 4 corners for thorough holes first with an electric drill.
4.Cut out a tunnel hole
First, you'd better drill holes in the corners of the outline. To do this is for cutting out the whole block of tunnel hole with a saw.
5. Drill holes for screws
Mount the cat door with double-side tape to the door. 4 screws have been provided for your use, tighten them with a screwdriver on one sides, it's suitable for glass door.
6. Done
Note:
please take of the height of glass/window/door you install the cat door to, usually, 10-15CM from the floor is ok.