Your cart is empty.
Your cart is empty.The Makita 6-Inch floor scraper is designed to work with SDS max hammers in a variety of applications including tile and adhesive removal. The unique tapered head design works to prevent the bolt heads being sheared off. The high strength blade can easily be replaced as it wears down.
Andrew W
April 21, 2025
Works great. We used it on commercial construction and removed thinset, ceramic tiles and vct tiles. It is designed for slicing under the tiles, if you try to lift up and there is any resistance, you will snap the blade - it is not designed for prying like that. Works great if used properly and what it is designed for. It is fast and efficient. Also, have the bolt side down, not the nut side, clearance issue and don’t smash the nuts while hammering. Also make sure to tighten the nuts regularly and I would add some locktight and tighten with an impact drill.
E. Bickford
March 30, 2025
Purchased this scraper to take glue off of about 200 sq ft of concrete so we could lay down new flooring. Worked very well. Bolts only loosened once so I tightened them a bit more and they haven't come loose since. Much more efficient than scraping by hand.
cabowabo
March 14, 2025
It's just the right length to use as an ice chipper on outdoor sidewalks. With a freeze / thaw cycle of weather this winter some of the ice is bonded to the concrete. A bit of work but better than the slush created by the chemicals in ice melt.
Tski
March 10, 2025
I couldn't be more disappointed with a demolition tool. Concept is good product design is flawed. Thin wider blade is great for removing the thinset but to many pieces. It has no chance of survival for a complete job. Anyone who purchased this should receive a complete refund. I used it to remove thinset after I removed the tile with a separate chisel. Within 4sq ft one of the bolts snapped in half. Within 10sq ft the rest of it began to break apart. Product needs to be molded in a single cast. Current design is designed to fail quickly. I remodel kitchens and bathrooms every day and have never written a review but I don't want anyone else to waste the money. I had to give it a star to leave the review but it would have 0 otherwise.
B P S
November 29, 2024
I can guarantee you that the negative reviews for this item are from people who don't know what they are doing and are using this in the wrong application. It is extremely well made and robust. I am a contractor and use this on a regular basis and it has held up very well.
Anthony J.
November 2, 2024
The bolts were sheared off the first day it was used. It was used to scrape thinset off concrete slab, which is what its described use is. I purchased stainless bolts and used loctite on them but they still loosened after a short amount of time. Very disappointment in the product.
Recommended Products
