Shopping Cart

Your cart is empty.

Your cart is empty.

XRDS-RF 25FT N Type Female to RP-SMA Male Cable, Type N to RPSMA KMR240 Cable for Helium and Iot Hotspot Antennas, Lpwans Or Lorawan Antenna

Free shipping on orders over $29.99

$19.43

$ 10 .07 $10.07

In Stock

1.Size:20ft


About this item

  • ⭐[Product Features] - Connector: N Female to RPSMA Male. Cable Type: KMR 240 Cable. Impedance: 50 Ohm. Length: 25FT. Color: Black
  • ⭐[Ultra Low-Loss] - This Low Loss rp sma male to type n female coaxial cable allows transfer of signals over large distances, This low loss coaxial transmission Line can be used in almost any application where good handling characteristics, improved shielding, and low loss is required.
  • ⭐[Premium Material] - The inner conductor of this kmr240 rf n female connector to sma-rp coax cable is made of solid copper, so it is efficient and causes low signal loss. The Jacket is made of the flexible UV proof PVC that could be used so long in the harsh environments in the outdoor.
  • ⭐[Prevent Coming Off] - This rp sma male to type n female coaxial cable uses the black heat shrink tube and lined adhesive by heat shrinking to connect the adapter to the coaxial cable. All the connections are solid and crimped professionally which could prevent the connector coming off from the cable easily.
  • ⭐[Widely Application] - This n to rpsma cable is good for Helium HNT Hotspot Miner, Lora LoraWAN Gateway Hotspot Module, Nebra HNT Indoor Hotspot Miner, RAK Hotspot Miner, BOBCAT Miner, SyncroBit Gateway, Wireless Network Router, WiFi AP Hotspot Modem etc.



N Type Female to RP-SMA Male 25ft KMR240 Low Loss Extension Cable for WiFi 4G LTE LoRa Antenna Nebra RAK Bobcat Helium Hotspot HNT Miner Antenna
Type: Outdoor N Female to RPSMA Male Extension Cable
Cable connector: n type female to rpsma male
Cable type: KMR240 Coaxial Cable, 0.21 inches in diameter. A larger cable means a much larger center conductor and supports better signal retention than RG58 Type coax
Length: 20FT
Impedance: 50 Ohm
Min. Bend Radius(Install):2 inch
Max.Operating Frequency:6000MHz
Operating Temp:-40 to +80℃
Maximum tensile strength:21.3Ib
6GHZ VSWR≤1.15
3GHZ Attenuation≤-3.8dB
6GHZ Attenuation≤-6.3dB
Application:
Connect from RPSMA Equipment to N-Type Antennas ,Used for 3G/4G/LTE/Ham/ADS-B/GPS/RF Radio to Antenna or Surge Arrester
Compatible with: Yagi Antenna, Panel Antenna, 4G、WiFi antenna、Lora Gateway, 915MHz Smart Home、LoRaWAN Antenna、 Helium Hotspot Miner etc.
Package Include:
1 x 25ft N Female to RPSMA Male Low Loss Coaxial Cable


John Wayne
April 24, 2025
XRDS-RF 10' KMR240 cable some would say is overkill for my intended use. I see things differently than most & decided to upgrade my RG58 to the KMR240 to enhance my FRS/GMRS transmission & reception. Those frequencies operate in the 400mhz range & according my research shows on a 10 foot cable the VSWR is .50 which is important. After all, we want to maximise the performance of the antenna. The KMR240 by XRDS-RF is a solid well manufactured cable that should give me a 100% efficiency when you factor in the high gain antenna on a 10' run.
Gimli
November 11, 2024
These KMR240 and KMR400 cables are afraid to call themselves LMR240 and LMR400, for some reason. I don't really know the reason. Perhaps they would need to pay for some certification?..The cable seems to be of good quality, and the terminators are well crimped, but it ships in a very tight coil, so I'm wondering if the spacing between the middle conductor and the shielding is disturbed because of that. I read that these low loss coax cables rely on precise positioning of the middle conductor to the shielding.I have no equipment to test the actual signal loss in this cable.
Recommended Products