Your cart is empty.
Your cart is empty.Specification:
- Fuse Type: ATC & ATO Fuse
- Way: 15 Way
- Voltage: 12V
- Cover Material: Plastic
- Base Material: Flame Retardant Nylon Material
- Product Shape: Insert Type
- package: 10pcs 5Pin 40A JD1914 Relays, 15pcs 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuses
Andy
July 18, 2025
De buen material y super resistente, un buen producto
Robert
July 13, 2025
this thing is not intended to be installed under the hood, the cover is slotted and will let water in.the fuses do not sit tight in the holder and come loose. Power for the relay block is all daisy changed together. you must trace out wiring and cut if you need to separate relays but 2 will always be in one circuit. no schematic of wiring this thing can be a pain if you need to get something done quickly. no i do not recommend and will not buy another. chines junk.
TheLastAndTheCurious
April 15, 2025
I have used several pre-wired relay/fuse blocks and this is one of the nicer ones. Very clean look, back side is accessible, and each relay/fuse socket square can be popped out and rearranged if you wanted to.The wires feel pretty heavy, you might spend a couple hours and $30 to have all these color coded wires.The relay input/outputs are bundled with a little tape per relay, but are not numbered. So you'll need a continuity tester to verify and number them 1-10.All the fuse blocks come wired to be on the same circuit, but you could clip a couple small wires and have three indivually switched circuits (i.e. constant, key switched, button switched, etc).The lid is great, easy to get on and off, no weird designs, etc. You could cut a hole and glue some plexiglass if you want to see the insides, or leave the cover off.Some of the relays were different heights, that was fixed by wiggling each relay down on their corners until they were bottomed out. Not an issue.For the price the only thing I could suggest is to have the relay wire bundles numbered 1-10.
Louis Spaulding lll
March 6, 2025
A great product
Ron Reneau
October 22, 2024
Appears to be of good quality, at least the fuse and relay mount does.I am not a fan of off brand fuses and relays, so just for my peace of mind, I'll be replacing the ones supplied. That's not a big deal.The one thing that really don't like about it is that all of the wires are cut way too short to be , in my opinion, useful.
Recommended Products
