Your cart is empty.
Your cart is empty.Product Description
Deadbolt Design
- Come with a built-in deadbolt, which means it can provide you with that extra sense of security.
- Fully secures RV door, making it very difficult for thieves to gain entry.
100% Made of Metal
RV door locks are all made of Aluminum alloy from the inside out,high hardness,waterproof,rustproof,dustproof,completely resistant to a variety of extreme weather effects.
Easy to Install
- Install the front side into door hole
- Mounting strike plate and shorter screws
- Install the rear part of door lock
- Mount pinch plate and tighten the screws
jasper5
June 19, 2025
my camper came with damaged entry handle and lock and missing keys because its older . i ordered these and i couldnt be happier. even included new screws and latchplates .each door handle set came with 4 keys ,andboth sets of door handles are all the same keys keyed alike. looks and fit perfect .
Customer
June 8, 2025
They look great, easy to use.
Customer
May 17, 2025
locks seem sturdy. Only thing are they keys seem of cheaper material, need to be positioned properly when entering into the the key slot. Easy to install took less than ten minutes
Customer
April 15, 2025
good product so far
David Pelerine
April 7, 2025
I good the item and installed it but 3 weeks after it stop working g it would not let my lock the door from inside and did not let me unlock went to check the other one I got at same time and it was doing same thing says will last a lifetime but only worked 3 weeks if that I do not recommend these to rvs since if this happens to you they don't do anything
Sharpeink
March 19, 2025
Item shipped on time. Seems very well made, heavy metal locks all work on one key! There are a total of 8 keys. I removed the old door lock set and installed these in about 20 minutes. As for Durability, will have to wait and see if they hold up over the next few years. Smooth operation so now my doors have matching keys and they open and close with ease no more holding the latch open to close the door. Installed on a 2012 Fourwinds 26 foot travel trailer.
meddevreseng
February 26, 2025
They seem pretty heavy duty for the price. It comes with 8 keys for the same locks! I was just looking for a quick fix and nothing too complicated since I'll be selling the camper next year. Went in quickly, except make sure the inside handle pull is down when you screw it in. Someone else mentioned that and I didn't remember to do that. Also, it would be helpful with an extra set of hands.
Russ
February 22, 2025
Everything I needed times 2. These were as direct a replacement as I could hope for. An exact match for the sticky door lock on my 09 S&S cabover. Could not have been easier.The $50 price for a pair is pretty good and although they feel a little loose and "sloppy", they feel like as good of quality as the handle they replaced.I would have given 5 stars except the strike provided didn't have countersunk holes for the screws. I didn't want the screw heads proud of the strike surface (they might catch on the jamb) so I used the hardware from the old handle. It would also be nice if the manufacturer provided Torx screws instead of Philips. Torx just tightens better. Other than that I'm very happy with the order.
Bruce
February 17, 2025
I have a 2016 Rockwood Roo with a broken deadbolt lock that I wanted to replace. This showed up so I ordered it.Upon initial inspection this set looked to be very well built and even included a very nice dual purpose stubby screwdriver, not those cheap ones you normally see. What was unique about this, was it included both Phillips and Straight bits… very nice. This is not magnetized but if you use this, see my tip below.TIP: A piece of tape applied to hold the head of the screw to the screwdriver will do just fine. Its something I’ve done for years to hold small screws, even with a magnetic screwdriver. Once the screw is started you can simply pull the screwdriver and it pulls the tape from the screw as well.Before installing this set I checked for potential fitment issues and found none, other than a possible issue with the door edge plate which resolved itself once the outer and inner handle surfaces were fastened together. It took about 20 minutes to remove and replace my existing set. I did have 1 issue but it was not product related, only alignment due to the new parts and gasket.(1) Aligning the inner deadbolt lever took a bit because the rubber seal on the exterior of the new handle would not allow the outer edge to sit against the door, thus not allowing me to align the slot in the handle lock with the tab on the lock. I simply used masking tape to hold the outside of the handle tight to the door exterior. Then I could align the locking lever and tab and insert all four inside screws. This then brought the door edge slots into alignment. NOTE: Make sure the deadbolt lever is in the correct position as shown on the installed image and ensure the inner door handle is in the closed position, before aligning the lock and attaching the screws. Otherwise neither will function. I was so focused on the lock I failed to notice this the first time.Replacing the striker plate was a 1 minute job and I was finished.Everything works great and now I have a functioning deadbolt, PLUS 2 extra keys. Now I have a spare, plus one for my keychain and for the set in my truck as well as one for the set in my shop.
SeedyROM
January 10, 2025
I needed a replacement for the door of my 09' Forest River Wildcat. Every single thing about this handle, was a perfect match for the original.It took longer to unpackage the handle than it did to install it, and it works like a charm. Its a single keyed unit, unlike the unit I was replacing.As a bonus, it actually comes as a set of two! You can replace both handles, and not just the one you are having trouble with, or you can put the second one away for any future problems.Both units comes with 4 keys, all required hardware, striker plates, etc., and a couple of spare pieces of each type of hardware.It just doesn't get any better!
Recommended Products