Customer
July 18, 2025
Fast shipping exactly as described great price
Steven A
June 16, 2025
Quality seems good for the price.I have seen a few complaints about the paint finish on these Rancho units, but it is underneath your truck so the point seems moot. As long as it has paint on it to prevent corrosion, the appearance of the paint need not be a concern.The most important thing to consider is that this unit does not come with the needed 1/2" x 2 1/2" bolt, nut and washers. If your truck was not originally equipped, you will need to buy this bolt. Just a heads-up.
Norbert Frazao
May 28, 2025
i used this item on the front steering on my pickup and i have used the shocks on my other vehicle before t
Paul P.
May 3, 2025
good fit, much heavier than stock
Todd Johansson
March 29, 2025
Fit perfectly, all hardware supplied, and steering is improved after replacing worn out OEM stabilizer. Easy job and access once skid plate is removed.
Ross
March 4, 2025
Good productGreat replacement for the stock one
Lisa Rempel
February 17, 2025
Product looks not very good quality. Havent installed it yet but it looks like its been used before or been badly damaged
Jay
February 5, 2025
Great replacement awesome quality
Joseph L.
January 12, 2025
This item is extremely easy to install, however if you have never replaced your OEM then prepare for a battle, have a pickle fork ready, or be prepared to take the clutch fan off shroud, to get to the top bolt. I used a impact extension as well as a metal pipe as a sleeve then a 4lbs mini sledge to "tap" it out after 2 hours of struggling with the OEM the new stabilizer went in beautifully!!!! Add anti seize for future removal if you plan to keep the vehicle awhile. Noticeable difference in steering wheel vibration and smoothness. I added this in combination with the rancho 9000xl front and rear shocks and couldn't be more happy!!!! I have a 2003 2500hd 200,000 miles feels like a brand new truck and rides like a dream now! Going to do msd coils and dual exhaust next to really open up the 6.0! God bless!
Customer
December 29, 2024
Works as it should.
Tyler Lehman
December 26, 2024
bolted on in place of the OEM stabilizer. took most of the shake and vibration and bump steer out. made my truck drive almost like new!
David O.
December 22, 2024
I like the looks of this damper shock and that the set up was simple. Just follow the instructions and zip tie the dust cover on. Works great and the response is like new. No wheel shake.
Aimee
December 2, 2024
2005 2500HD 2WD fits as it should. Doesn’t cause the wheels to pull right as my previous bilstein stabilizer did. Yes there was paint on the bushings, yes the tapered end is a bit long so it doesn’t bottom out. Non of those things affect the functionality and it works! Driving has become enjoyable again! Mine was missing the boot. Being that it sits behind the guard and mostly use my truck for highway travel, I installed it anyways.