Your cart is empty.
Your cart is empty.Are you tired of ordinary cabinet doors? Upgrade your woodworking game with our premium panel raising bit w/backcutter! Enhance your woodworking capabilities and elevate your craftsmanship with the Mabco Brand Raised Panel Cabinet Door Router Bit. Take your cabinet door projects to the next level. Your creations will be the envy of all who see them! 1/2 inch shank for stability. Super tough C3 carbide for longer cutter life. Teflon coating for heat resistance. Anti-kickback design for safety. Caution: This is a large bit and should be used on router tables and shapers with 2-1/4 horsepower or more. Keep RPMs below 12,000. Do not try to use it with a handheld router. This bit requires a minimum opening in your router table or shaper of 3-1/2 inches. Bits come with a thin coating of grease to prevent rust during shipping. This grease can easily be removed with a paper towel or rag.
daniel magaña
July 30, 2025
Buen producto
George
July 4, 2025
Bought this bit to match existing cabinet doors. It worked great on the 2 doors I made out of 3/4 solid oak.I used it in my 1hp shaper and found it nicely balanced.I don't think you can go wrong for the money.I made 2 passes and the finished result looks great.The bit included 3 shims and I used 2 of them between the bearing to ajust the tongue on the panel to fit in my door frame.
Tammy Brevell
May 30, 2025
Smooth cuts, great price. This is my first set of rail and stile bits. There is a bit of a learning curve but after a few test runs, I felt very comfortable with the process and was able to batch out 4 doors for a cabinet that I'm building. All 4 fit together nicely and after a little sanding look very professional. Highly Recommended.
Rickster
December 18, 2024
I am just a woodworker with a home shop, so I don't make doors too frequently. But when I do, I need a good set of bits that won't break the bank. These bits seem very well made. There is a generous amount of carbide and the non-cutting surfaces are coated to minimize pitch buildup. The machined surfaces are accurately ground and the shanks stayed secure in my router. My rails fit perfectly into my stiles, and the panels fit perfectly into their grooves. I really cannot tell a difference between doors made with these bits and doors I have made using much more expensive bits.
Scott
November 1, 2024
This is a nice set of three, 1/2-inch router bits. The are very heavy duty and came extremely sharp. They are made of C3 Carbide and are Teflon coated for better heat resistance.Since these are so hefty, MABCO states that these should only be used on a table router with at least 2 1/4 horsepower. After handling and using these, I totally agree.This set of bits are precisely made to fit each other so that the rails and stiles fit will fit well together. The shank measures exactly 1/2-inch as well.Great bits at a great price!
Recommended Products
$32.98
$ 15 .83 $15.83
$32.06
$ 17 .27 $17.27