Your cart is empty.
Your cart is empty.The POWERTEC MT4000 Deluxe Miter Saw Stand with Wheels and 110V Power Outlet is the ultimate portable saw workstation. The stand is constructed with steel tubing and locking steel legs which provides a weight capacity up to 330 lbs. Miter saws, and other bench top saws and planers can be easily secured and removed with quick-dash release universal mounts. Two adjustable steel rollers support your work piece along the stand length smoothly and accurately. Useful flip- down supports for lumber or material storage offer easy accessibility to work materials. The stand also includes a convenient 3-outlet power strip which makes being near an electric outlet unnecessary. For stability, the leveling feet are adjustable for uneven surfaces. For ease of mobility, this stand comes with two 8-inch rubber wheels; just roll the stand to your preferred location (and work away). Height: 32-1/4" (819 mm); Extended Width: 79-1/4" (2013 mm): Maximum Load Capacity: 330 lbs. (150 kg); Outlet Input Voltage: 125V AC; Input Ampere: 15 Amps; Net Weight: 40 lbs. (18 kg); Gross Weight: 42 lbs. (19 kg).
Carl
August 7, 2025
Assembly took only about 15 minutes and the instructions had diagrams which was very helpful. The saw base fit the receiver parts perfectly. It would have been helpful if they had included an Allen key for the handle bolts and if they had identified a route to run the power cord from the saw to the outlet attached to the saw stand. The stand appears to be quite sturdy and a good working height.
Dan Priest
August 6, 2025
Very recent purchase, so I cannot speak to how the stand holds up in the long term, but I am very impressed with what I see thus far. Stand was very easy to set up, with very clear directions, if needed.There were no missing parts, but as another review mentioned, the mounting bolts for the saw are quite long. I'm not going to take anything from my rating for that, as it may be required by certain saws, but just something to be aware of. Different bolts, or grinding these down will have the issue sorted in no time. As with the other review, the length of bolts would have hindered the movement of my saw.This is a shop mount, so it will not see a lot of collapsing and wheeling around, though I see no reason why it wouldn't do well at that.Overall, highly recommended.
Ben Plett
July 29, 2025
Just set my stand up with my bosch 10" miter saw. The stand seams to be very sturdy and rigid and I like the fact that the material support slide outs have two bars instead of most stands that just have one. Mine came with three of the small yellow knobs for locking the slides in place instead of the four that it's supposed to come with. Not a big deal, I dont think I'll really need more than one per side anyway. Mounting my bosch saw worked well, the holes all lined up. The biggest issue is that the bolts connecting my saw to the adjustable mounts are to long. They get in the way of the saw when I go past 45 degrees for miters in either direction, both in the front and back of the bracket. Simply grinding the four bolts a half inch shorter now that they are in place should fix this. It might just be the Bosch saw where these get in the way, but still something to note. I like the big wheels that come with it. Nicer than my Milwaukee stand, but the clip that secures them to their axle doesn't look the strongest. Time will tell how they fair moving the saw around on rougher ground.All in all I think the value of the stand is great considering it's about half the price of many of the big name Gravity lift stands. Maybe not the stand to use if its moving between jobsite and trailer every day, but if you need one for your shop that you still want to pack up every so often this one should do the trick.
Bruce Brown
July 26, 2025
Works better than hoped
Jimmah
July 6, 2025
Decent unit for the price, have used it quite a bit since I got it. Cant stand the unit up with saw in place (Dewalt 12"), I had to ream 2 of the leg holder holes larger to allow it to close properly. Also had to red loctite roller retainers as they kept coming out, (tried blue loctite first but they would break it free). 5 stars for how it works when in use, I couldnt be without now.
Bruce Warren
June 26, 2025
Very sturdy and nice feature to be able to plug in other tools to the power caddy
Eduard and Elena Fritz
April 24, 2025
Durable. Sturdy. Don't know what I would do without it. Helped me a lot with my project.
Darlene
April 13, 2025
This is amazing worth the money put my new miter saw I got for Xmas on it Amazon has the best
José F González
March 30, 2025
Tiene algunas fallas de diseño, como los contactos eléctricos que no se pueden usar del todo, pero la mesa cumple perfectamente su función. Muy resistente y fácil de maniobrar para guardar. Buena opción.
MAB
March 18, 2025
Pros: Overall construction is SOLID... Quality is there. Easy to assemble. For quality you get weight. I like this so the saw doesn't move around a lot while working. Besides - they put wheels on for a reason. Ok ... The outlet design is awesome, can use their cord or your cord and cord doesn't get in the way while moving. The clamp down for the DeWalt DWS779 works but the saw slid a little to the rear while mounting on table. I will fix this - absolutely without complaint. The material standoffs at the ends are nice - with / without roller is a good option. The knob for tightening it is a little robust and if the saw is stood on edge, ie. next to a wall - the knob will hit the ground. Changing that for a regular bolt. Last thing - when I get something like this, I always look to see what I would do if the table becomes broken while on the job... Thanks to the nut and bolt selections and overall construction, this stand will be around for a hot minute. So - the cons: Weight, but that't the trade off between strong and more importantly - stable, the knob for the material standoff, but that's just using a bolt vice the knob and not over torquing it, and the mount of the brackets to the saw, which I blame which I will fix by putting a sticky back rubber surface between the saw and the mount. In short - highly recommend this to anyone. Wow - was totally impressed with the guages of metal used. Quality good, design good, cost makes everything perfect. Thank you ... Not sure where it was made but here's the deal - it works...
scihawk
February 23, 2025
Really happy with this stand. I'm using it for a Dewalt DW715 and it fits perfect. The stand is stable and is heavily built for its purpose. Setup took about 5 minutes as it is mostly assembled upon arrival. I see that there have been some shipping issues for other customers but mine arrived without a scratch on it.I chose this over a stand available at a popular discount tool retailer and I'm glad I did. This stand is beefier and more stable so it's definitely worth the extra few bucks.To me the fold-down wood racks on the legs looked like plastic in the picture but they are metal. I also wondered from looking at the pictures if the unit would stand on end but I can confirm what I think I saw in other reviews, the wheels are for moving the unit only. Even without a saw mounted on it, the unit is difficult to balance on its end, so if you are looking for something that you can drop the legs on and stand on end with the saw attached, this isn't for you.I agree with reviewers that the outlet placement is awkward. Unless your saw bed is two inches higher than mine, the center outlet will be covered by the work support arm. Easy enough to trim the arm down and I suppose a byproduct of building a universal stand, but still a bit awkward.Tip for people mounting 12 inch saws. Slide the saw forward on the brackets and mount the rear holes first.. If you mount the front first the back side of the brackets are partially blocked by plastic so the screws are difficult to place.Now I'm off to see if I can source a few pairs of the quick release mounting brackets. I'd love to have some mounted to some of my other bench top tools.
Julio César Gutiérrez Gro
January 27, 2025
La caja venía un poco maltratada pero el contenido no tuvo ningún desperfecto, vale la pena costo beneficio pues ofrece funciones que otros no. Funcional y de fácil transportación....lo recomiendo ampliamente
B1uefox
January 17, 2025
This stand was my alternative to mounting my Kobalt 10" sliding miter saw to a tabletop. I bought it for the versatility and power outlet. I did days of review research on lowes website as well as every stand and table sold on Amazon for the purpose of a miter saw. The shipping was fast and seemed relatively undamaged on initial inspection. The inventory of items was complete. I put the package together in 10 minutes. No issues there. I noticed the sliding insert for the arm extension was bent and slightly roughed up. The arm did not fit in the slide hole until I bent it slightly back to the original intended shape. No other defects have been found thus far. The stand is heavy and sturdy and doesn't threaten to tip while cutting large boards. The breakdown to a mobile cart is a little awkward for just one person but it's doable with patience. Took about 1+minutes to get into a rolling position with cords secure. I like the additional outlet strip at the end. However the extension arm when fully collapsed in is butted up against the power strip pretty tightly. Seems a little awkward. See photo. The wheels are sturdy but only help on by 2 C clamps on either side. Bearings would make a great addition to wheels but an increased price point would obviously be associated with that along with maintenance needed over time. So I will take the clamps for now. Overall alt his is a great product in my eyes. I gave it 4 of 5 stars for manufacturing damage/shipping damage as in unable to determine how the slot was bent. Also because I have used it very little thus far. I will review after my next project for an additional star if I am satisfied.**UPDATE 11/29/2017**I have built about 20 small to large projects (utilising a mother saw) since the first post and also a household move since the original post and the stand is still holding true to my original post. No damage incurred and still sturdy as ever. The only reason I do not bump it to 5 stars is for the power strip cord sent with it. The cord is short and should be at least 10’ to accomodate all different places for a power outlet. This is obviously more of a personal gripe than a factor on the stand itself. I give it 4.5 stars ⭐️ 🌟 🌟 🌟 🌟 if I was able to.
Recommended Products
$78.47
$ 35 .27 $35.27