Your cart is empty.
Your cart is empty.PONY 50 Clamp Fixture for ¾ Inch Black Pipe is America’s most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly - in applications that range from do-it-yourself to industrial production. Mounts on any length 3/4” black pipe with both ends threaded (pipe not furnished). A PONY Clamp Fixture is one of the handiest tools in any shop. One set of PONY Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe. Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end. Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped. PONY Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs. (NOTE: Make sure that pipe lengths are at least 7” longer than work to be clamped.) PONY Clamp Fixtures feature the original Multiple-Disc-Clutch design which allows a secure hold at any point along the pipe; no slipping, no pipe crushing...just instant adjustment either toward or away from the work being held. The extended clutch discs are accessible above and below the pipe for easy release. Castings are malleable and/or ductile iron; orange and black baked-enamel finish. Screw is 5/8” diameter steel with special, smoothly cut Acme threads; hardened steel thrust bearing in sliding head prevents wear at point of screw; crank-type handle. Multiple-Disc-Clutches are plated hardened steel; 4 pieces per set. Clamping faces are approximately 1-3/4” square. One coil-spring stop is included with each clamp fixture and prevents tail-stop from sliding off pipe. PONY Clamp Fixtures are designed for long life. The Chicago based Pony Tools Inc. which was established in 1903 is the manufacturer of all PONY Clamp Fixtures. The PONY 50 Clamp Fixtures are made with U.S. and foreign parts in our Chicago factory.
Great product
August 8, 2025
Great for being adjustable for many different job sizes.
Helene Jennings
July 6, 2025
Well make product, would order again
Customer
June 18, 2025
Well madeAnd string
Michael Bole
May 21, 2025
Good
BC
April 28, 2025
Nothing to dislike, it does the job, wish I could have a drawer full!
Customer
April 25, 2025
Have purchased a few of these previously - bought these for my brother-in-law as a gift. Handy for woodworking/ laminating - but u need your own rods.
Frédérique Simard
April 7, 2025
j'ai environ 200 serre-joints. les 100 premier sont de 6 marque différent. puis j'ai découvert celle ci alors j'ai avec le temps acheté 100 de ceux-ci et je les utilise en premier et quand les autre model finissent pas briser je les remplace par ceux-ci. que du bonmheur!!!!
Mickael
April 4, 2025
Parfait ! Je recommande
ブラックラット
April 4, 2025
パイプ（SGP）3/4を買うとき長さを決めて購入した。木材のつなぎを合わせて閉める。変形もなく良かったです。
P. S. Abreu
March 26, 2025
Manufacturer recommends black 3/4 pipe, maybe because it grips better the clutch on the moving part of the clamp. But the 3/4 black pipe I could find locally, seller said was too weak/thin to open the thread, so I went with "medium series" galvanized 4/4 pipe. Fact is its stronger and it doesn't slip, works perfectly. Build is very good, namely the clamp "square" thread which puts a very positive strong force. Recommended.
mohamed soud
March 11, 2025
كلامب ممتاز لتثبيت الأعمال الخشبية وتقدر تركبه على أي ماصورة حديد 3/4 بوصة مسننة (محلات السباكة ممكن تسننها لك)
Gabcer
February 14, 2025
Las utilicé para prensar una puerta, tienen muchísima fuerza al grado que pude unir todas las piezas utilizando solo 2 prensas. Realmente me sorprendieron,, sin ellas no hubiera podido terminar. Las recomiendo ampliamente. Cuando las compré dude de ellas, pero al ver la cantidad de presion que ejercian sobre la madera quedé sorprendido.
Clément Léger
October 22, 2024
Bonne qualité, finition assez propre et vis assez fluide. Des tuyaux achetés sur toolstation vont très bien avec.
Recommended Products
$10.58
$ 5 .03 $5.03