Your cart is empty.
Your cart is empty.Product Description
The NM-M1-MP83 is an enthusiast-grade, multi-socket SecuFirm2+ mounting-kit that represents an ideal upgrade for users who want to migrate their Noctua CPU coolers to the new, Torx based SecuFirm2+ standard or to the latest sockets that their cooler did not yet support at the time of purchase. Compatible with a wide range of Noctua CPU coolers with 83mm mounting pitch since 2005 (see detailed compatibility information) and supporting all the latest desktop platforms from AMD (AM5 & AM4) and Intel (LGA1851, LGA1700, LGA1200, LGA115x), the NM-M1-MP83 provides an excellent, future-proof basis for air-cooled premium builds. On AM5, the offset mounting option can significantly improve performance with typical reductions in CPU temperatures of 1-3°C. Like all SecuFirm2 mountings, it combines outstanding reliability, optimal contact pressure and easy, straightforward installation. At the same time, following the new SecuFirm2+ standard, it uses Torx T20 instead of Phillips head screws for even better handling and resistance to wear. With the included magnetic tip NM-SD1 Torx T20 screwdriver, it is perfect for power users who frequently change their setups and demand the new gold standard in convenience and durability under heavy use. The chromax.black version with its all-black parts is an ideal match for Noctua’s chromax.black line heatsinks.
SecuFirm2+ standard with Torx
The new SecuFirm2+ standard uses Torx T20 instead of Phillips head screws. The reduced cam-out of the Torx drive makes it easier to operate, especially in space restricted environments such as pre-assembled PC systems. At the same time, there is less wear on the screw heads, which makes the plus version even more durable and perfect for power users.
For Noctua coolers with 83mm mounting pitch
The NM-M1-MP83 kit is compatible with a wide range of Noctua CPU coolers that use 83mm mounting pitch, whereas heatsinks with 78mm mounting pitch must use the MP78 version. Please refer to our detailed compatibility information to check which kit is right for your cooler.
Multi-socket support
The NM-M1 sets are Noctua’s most comprehensive multi-socket mounting-kits today: Supporting AMD AM5 and AM4 as well as Intel LGA1851, LGA1700, LGA1200, LGA1151, LGA1150, LGA1155 and LGA1156, it’s the ultimate kit for a wide range of upgrading or switching scenarios.
Offset mounting option for AMD AM5
The NM-M1 includes Noctua’s offset mounting bars for AM5 that make it possible to install the cooler shifted towards the south side of the socket by 7mm, thereby achieving better contact pressure right above the Core Complex Die(s). This improved contact exactly at the processor’s hotspot can significantly reduce CPU temperatures with typical improvements in the range of 1-3°C.
NM-SD1 magnetic tip screwdriver
The NM-M1 sets include Noctua’s NM-SD1 Torx T20 head screwdriver that is ideal for all the screws of the kit. Thanks to its magnetic tip and the 150mm long shaft, even remote screws in tightly packed environments such as ITX or HTPC builds are easy to handle without dropping.
Walyn
June 13, 2025
fue muy util ...resolvimos
Cliente
March 18, 2025
.
loci
January 5, 2025
Had an older Dh14 on a 7800x3d and honestly didnt expect the offsets to make such a differenceInstantly knocked about 10'C off the temps running R23, and im 99% sure it was previously mounted perfectly.I also fitted a TG mounting frame in prep for lapping the CPU later so having the CPU lay flat may have also helped, in reality it might have knocked 5 to 7 degree's off but im still over the moon.If you have a 7000 series AMD chip, the offsets are a must, and the torx heads are infinity better that crappy Philips so I'd also recommend just getter the whole kit here if you dont mind the premium.Top product from Noctua, absolutely sparked joy.
Igor Cajic
November 28, 2024
Versand super, Produkt super. Restlos zufrieden!
Bülent Demir
November 1, 2024
tam takım olarak geldi teşekkürler.
Recommended Products
$116.99
$ 55 .43 $55.43