Your cart is empty.
Your cart is empty.Product Description
Details
Equipped with adjustable plastic sleeves to make the electric drill more firm.
This universal bench clamp support tool can drill depth up to 60mm, comes with 2 holes for mounting.
Designed with slots on the iron base for installing machine vise, make it more convenient to operate.
Package Included
- 1 x Base
- 1 x Column bar
- 1 x Rocker
- 1 x Lower limit Fixed sleeve
- 2 x Adjustable plastic fixed sleeves
- 1 x Hex wrench
Electric grinding jaw range (35-38mm)
Electric drill jaw range (38-42mm)
High Jaw: 20mm
Specification
Parameters of the bracket
- Shaft: 400mm
- Clamping: 38-42mm
- Single stroke: 0-60mm
- Substrate: Aluminum alloy
- Weight: 1.5KG
Parameters of flat pliers
- Dedicated to electric drill stand
- Material: Iron-nickel alloy
- Maximum opening of aluminum alloy material: 65-70mm
- Center distance between the bottom two fixing grooves: 90MM
- Maximum clamping distance: 68mm
- Fixing screw aperture: 10mm
Application
Use this drill press stand for electric drills with collar diameter 38-43mm (1.7"or 1.5").
This universal bench clamp support tool is designed with slots on the iron base for installing machine vise, make it more convenient to operate, ergonomic rubber handle of the workbench repaur tool clamp is anti-slip and easy to grab.
Aural
June 10, 2025
Esta bien para la casa. No es nada fuerte. Suficiente para madera.
Sam (W3OHM)
May 11, 2025
I used this with a temperature controlled soldering iron (with an adapter) to insert threaded brass inserts into my 3D printed parts. You can find the iron and the tip adapter and the brass inserts here on Amazon. If you look on Thingverse you can find a slip in adapter that will allow you to hold the soldering iron in place in this drill press stand. It works really well for this purpose. I could have also 3D printed the press but the cost for the already made metal one makes the purchase rather than print decision a no brainer.
Jamal A.
April 28, 2025
Too many parts to assemble for a basic stand. It’s not stable and need constant adjustment
Robert Preato
April 8, 2025
The idea is great but the product design is very poor. Quality of materials is very low, but at such a low price I would expect that. The problem is not the quality but the design of the press. The drill simply sits in a ring and there is no way to secure the drill to the press. As a result, you must hold the drill with your hand and apply downward pressure as you lower the drill. Otherwise it will simply fall right out of the press. Since you must hold the drill by hand, there is no way to ensure that it remains perfectly vertical, which is the whole purpose of a drill press. There is absolutely ZERO advantage to using this device over simply holding the drill by hand. In fact, this device make the job harder, not easier. This device is therefore, worse than useless
Ken Matthews
October 31, 2024
Well, wasn’t really impressed with quality and how small the hole was for the drill. Found an inexpensive drill that actually fits in the small mount.So I decided to keep the tool.
Recommended Products
$629.58
$ 71 .28 $71.28