limontek Power Steering Pulley Puller Installer Tool, Power Steering Pump Pulley Removal Tool Compatible with Ford, GM, VW and Chrysler Vehicles

Did the job.

I got the chance to try this out yesterday. The power steering pump on the El Camino has been leaking and making noise. I wanted to change the pump before a complete failure broke the belt and left me stranded. The Saginaw pumps on GM vehicles usually need to be pulled off the pump and put on the new one. I've ruined more than one pulley trying to remove it without the proper puller. I sometimes borrow a puller from the tool library at the auto parts store, but sometimes it's gone. I ordered this puller hoping that it would save me from that problem. This puller worked great and got the job done. It looks identical to the puller I borrow. Now, I don't have to worry about borrowing one or if they even have it because someone borrowed it. So convenient to have my own!

I've used similar tools, like identical ones, in the past. For whatever reason this one just couldn't extract the pulley from my PS pump (4.8L Chevy Silverado '99). Perhaps it was just seized on that bad. I eventually tried heating the hub of the pulley with a torch but it still wouldn't release. The tool eventually would get slanted and just pop off pulley (pictured). I gave up and torched a hole in the pulley to get the bolts out to remove it from the bracket with the alternator and idler puller. I got a new pulley from the auto parts store and used the installation tool to press it on the new pump. That worked fine, no complaints. So, I'm not going to completely fault the tool since I didn't have another one to try extracting the pulley with.

The limontek Power Steering Pulley Puller Installer Tool is a highly practical and useful tool designed for removing and installing power steering pulleys on various vehicles, including Ford, GM, VW, and Chrysler models. If you're working on power steering repairs or maintenance, this tool simplifies the process by providing a reliable method to remove or install the power steering pump pulley without damaging the components. Below is a detailed review of this product based on its features, functionality, and overall value.1. Build Quality and Materials:Durable Construction: The limontek power steering pulley puller installer tool is constructed from high-quality steel, making it sturdy and capable of withstanding the stress and force required for removing and installing power steering pulleys. The tool is built to last, and its materials are resistant to wear and corrosion, ensuring a long lifespan even with frequent use.Solid Design: The tool features a well-designed structure with precision-machined components that provide a secure fit and reliable performance. The steel housing and threaded components are durable enough to handle the pressure involved in pulley removal and installation tasks without risk of bending, warping, or breaking.2. Compatibility:Wide Compatibility: The tool is compatible with a range of vehicles, including popular brands like Ford, GM, Volkswagen (VW), and Chrysler. This wide compatibility ensures that the limontek Power Steering Pulley Puller Installer Tool can be used on a variety of vehicles, making it versatile for both DIY mechanics and professional repair shops.Vehicle-Specific Fitment: The tool is designed to work with most power steering pulleys on the market, including those commonly found in the aforementioned vehicle brands. However, users should always double-check their vehicle's pulley size and ensure that the tool's adapters are suitable for their specific model. Some vehicles may require additional adapters or modifications, which can be checked in the product documentation.3. Functionality and Performance:Efficient Pulley Removal and Installation: The main function of this tool is to remove or install power steering pulleys without causing damage to the pulley or power steering pump. It features a puller and installer mechanism that is designed to grip the pulley securely and apply even pressure, ensuring that the component is removed or installed with ease and precision.Easy Operation: The tool works by using a threaded mechanism to remove or install the pulley. Simply position the tool over the pulley, thread the appropriate adapters into place, and use a ratchet wrench or hand tool to turn the screw. This allows you to gradually remove or install the pulley, avoiding any sudden jerks or damage to surrounding components.Smooth and Effective Performance: Users report that the limontek power steering pulley puller works smoothly in real-world applications, and the tool efficiently removes pulleys from the power steering pump without causing harm to the pump or pulley. The tool allows for precise alignment, making the removal process easy and hassle-free.4. Ease of Use:Simple Setup: The tool comes with clear instructions, which make setup relatively straightforward. You can quickly identify the right adapters and thread them onto the puller tool to get started. The user-friendly design makes it accessible for DIY enthusiasts, and even those without advanced mechanical knowledge can use it with minimal guidance.Minimal Effort Required: The tool's design minimizes the effort needed to remove or install the pulley. Once the components are properly aligned, a standard wrench or ratchet tool can be used to apply the necessary force, making it much less physically demanding compared to other manual methods of pulley removal.Compact Design: The tool is compact and portable, making it easy to store in a toolbox or carry around to different jobs. It doesn't take up much space, which is especially helpful for those who have limited storage or need to take the tool on the go.5. Durability and Longevity:Built for Frequent Use: The tool's high-strength materials and construction ensure that it can handle frequent use without compromising its performance. Whether you're a professional mechanic or a DIY enthusiast, the limontek power steering pulley puller installer is designed to last and maintain its integrity even after multiple uses.Resistant to Damage: The tool's components are resistant to rust and corrosion, meaning it can endure exposure to moisture, grease, and other harsh conditions typically found in automotive repair environments.6. Considerations:Adapter Compatibility: While the tool is designed to work with most power steering pulleys, some vehicles may require specific adapters or modifications for perfect compatibility. Ensure that your vehicle's pulley matches the tool's adapter sizes to avoid issues during use.Tool Size: The tool is generally designed for vehicles with standard-sized pulleys, so users with vehicles featuring unusually large or small pulleys may need to verify whether the tool will be compatible. Always confirm the specifications before use.7. Overall Value:Affordable and Effective: The limontek Power Steering Pulley Puller Installer Tool offers excellent value for its price. Given its robust construction, wide compatibility, and ease of use, this tool provides a cost-effective solution for power steering pulley removal and installation. It is priced competitively compared to other tools in its category, making it an excellent choice for those who need reliable performance without spending a fortune.Versatile Tool: With its compatibility across a wide range of vehicles, including Ford, GM, VW, and Chrysler, this tool offers great versatility, making it suitable for a range of repair or maintenance jobs. It is a must-have for anyone who frequently works on power steering systems or needs a reliable solution for pulley removal.Conclusion:The limontek Power Steering Pulley Puller Installer Tool is a highly effective and durable tool designed for the removal and installation of power steering pulleys in a wide range of vehicles, including Ford, GM, VW, and Chrysler models. Its sturdy steel construction, user-friendly design, and compatibility with various pulleys make it an excellent choice for both DIY mechanics and professionals. Whether you're replacing a faulty power steering pump or performing routine maintenance, this tool ensures precise and damage-free pulley handling. It offers great value for the price, making it a reliable and cost-effective solution for any garage or workshop.

Didn’t work wouldn’t stay centered on pulley