Your cart is empty.
Your cart is empty.Product Description
Common Questions
- 1.What is the maximum amperage used by a 1.12V push-rod motor load?
- 5-6A
- 2. When the push rod motor is working, if the power is suddenly cut off, where will it stop?
- If the power is suddenly stopped during the telescopic work, it will stop in place and will not automatically reset
- 3. If two push rod motors are used together, how many amps should the relay have?
- One with 10A, 2 with 20A
- 4. How to calculate the length of the push rod motor?
- Hole moment (stroke+175)+37=total length
𝐀𝐥𝐮𝐦𝐢𝐧𝐮𝐦 𝐀𝐥𝐥𝐨𝐲 𝐂𝐚𝐬𝐞
This product adopts the excellent aluminum alloy case, which is thick, sturdy, and powder-coated on the surface for anti-rust.
𝟏𝟐𝐕 𝐏𝐨𝐰𝐞𝐫 𝐒𝐮𝐩𝐩𝐥𝐲
To protect the motor and main electronic device, this actuator should be connected to DC 12V power supply.
𝐈𝐧𝐬𝐭𝐚𝐥𝐥 𝐰𝐢𝐭𝐡 𝐁𝐫𝐚𝐜𝐤𝐞𝐭𝐬
Installation is not complicated and you can finish the job quickly. We also offer two brackets and several screws for more flexible assembly.
Description:
100% brand new and high quality .
Can be used with any application that requires moving something in a straight line.
Features:
-Actuators are widely used in industrial machinery such as engineering vehicle, electric lifting platform, CNC machine tool, Manipulator etc.
- In daily life uses, linear actuators can serve to adjust massage chair, TV lift, table lift, electric sofa, electric treadmill, car electric tailgate etc.
- Linear actuators are used for moving and adjusting applications: patient shifter, electric wheelchair, electric nursing bed, esthetic dental chair etc.
- Linear actuators also apply to many automatic agricultural machineries: sprayers, lawn mowers, tractors, cultivators, harvesters etc.
How to install the actuator:
1.Prepare to connect the two wires of the actuator to a 12 volt battery.
2.Red wire to the positive terminal and Black wire to negative terminal will make the actuator extend. To make it retract, just reverse the terminal connections.
3.To simplify the last step, you can prepare a reverse polarity relay or switch (not included) for the actuator. When you want the actuator to extend and retract, just press the switch.
4.Your actuator will hold its position when the power is off. It will automatically stop when reaches the end.
5.The actuator has pre-installed inner limit switch, it cannot be adjustable.
How to protect your actuator:
1.Please use the 12V DC power adapter.
2.The actual load does not exceed the rated load.
3.All the actuators have duty cycle, they are unable to work all the time without stop.
4.The actuator is not completely waterproof, please do.
𝐏𝐮𝐫𝐞 𝐂𝐨𝐩𝐩𝐞𝐫 𝐂𝐨𝐫𝐞
𝟓-𝟕𝐦𝐦/𝐬 𝐄𝐱𝐭𝐞𝐧𝐬𝐢𝐨𝐧 𝐒𝐩𝐞𝐞𝐝
𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 𝐓𝐫𝐚𝐧𝐬𝐦𝐢𝐬𝐬𝐢𝐨𝐧
𝐂𝐨𝐥𝐝 𝐚𝐧𝐝 𝐇𝐢𝐠𝐡 𝐓𝐞𝐦𝐩𝐞𝐫𝐚𝐭𝐮𝐫𝐞 𝐑𝐞𝐬𝐢𝐬𝐭𝐚𝐧𝐜𝐞
gilles couture
June 19, 2025
excellent
François
June 16, 2025
Ce vérin électrique es très fort et fonctionne très bien. Il m’a l’air très résistant. Seul chose le pourquoi du 4 étoiles c’est qui es très lent dans mon application.
Client d'
June 12, 2025
Je l’utilise pour remplacer un cylindre hydraulique (sur mon tracteur). Je fait monter et descendre ma tondeuse ventrale et fonctionne très bien
Ron
May 28, 2025
The media could not be loaded.
Robertmchaffie
May 21, 2025
It was to big for my lift chair sent back
Byron Y.
May 20, 2025
It’s ok
dave
January 28, 2025
used it to make a snow blower shoot to go up and down . worked great but in summer time I removed it and put inside the garage
ANDRE BOUTIN
January 6, 2025
Bonjour g reçu mon actionneur linière avec aucune instruction pour le connecter c tu normal.Je sais qu'il y a seulement 2 fils mais je voudrais pas faire une erreur
Recommended Products