Your cart is empty.
Your cart is empty.This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Wayne Nero
July 21, 2025
Hello,I was having to guess what pulley worked with what pump.So here you go!Remanufactured Power Steering Pump With Reservoir by BBB INDUSTRIES - 731-2152I left the Pump in the freezer for a couple hours, I used, 8milelake Power Steering Pump Pulley Puller Remover Installing Tool Kit Compatible for GM & Ford from Amazon.Worked a treat! Put the pulley puller in a vise once you are ready to press. It takes a lot of mustard to put it on, you will not be able to hold it!!Good luck!!
Lucy Schmidt
July 8, 2025
At first I thought it was going to be too tight to fit on, you definitely are going to need the pulley installer, with the pulley installer it went on like nothing, was a piece of cake. The puller/installer is a free rental at Canadian Tire if you don't have one. Don't try to install it without the puller / installer you will break your pump ( no I didn't break my pump) don't worry if the original pulley on your pump is slightly bigger or slightly smaller all you need to do is get a slightly bigger or slightly shorter belt.
Nathalie Fortier
June 23, 2025
Fait parfaitement
Linda
March 5, 2025
works well
Brian Fletcher
February 21, 2025
Perfect fit.good value.
AJ
February 11, 2025
Order this in the afternoon, it was on my doorstep when I woke up.Excellent service.I'd be interested in your other services.Thanks
Hemingmyway
January 15, 2025
needs to be installed at a shop. don't try to beat it on with a hammer!
craig
December 8, 2024
Bought this for my 1983 Saginaw pump on my Jeep and the pump shaft is 0.75" and the pulley insided diameter was 0.73 wouldn't fit . But that's what I expected from dorman .. not my first choice but couldn’t find a new one locally.
John
December 7, 2024
It was a bit too tight on the pump shaft and almost destroyed my install tool. I had to use my die grinder to open the hole up a bit to install.
Recommended Products
