Your cart is empty.
Your cart is empty.Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Suzanne Levesque
August 4, 2025
Didn’t got it because talk with the seller and he explained that will not fit and I’m very happy that the seller toke the time to let us know thank you very much.
Customer
August 3, 2025
Great Product Great Price
Customer
July 20, 2025
The seal and spline were a perfect fit. The 4 bolts fit. The problems are the original keepers and the diameter of the universal cups was off by 2mm. I had to modify this part to fit. There are no end cup keepers so centering this part to balance is very difficult. Once I grinded out 1 mm per side and found brackets that would fit, it went better. I had to measure the cup distances in the yolk then with my mig, i created cup keepers. Took it for a small 20km ride, got it up to highways speed then reinspected. Seems to be working. Once new rust builds up it will be snug. I use this on my yard plow truck so its gotta work. This part is not a direct fit. Check with GM before buying dorman
Customer
July 10, 2025
When I was shopping for an end yoke for the FRONT differential of my 2002 Duramax 3500, I had a difficult time finding the right product. I relied on measurements instead of the manufacturer's listings. The manufacturer describes this part as a "Rear Differential End Yoke Compatible with Select Models," but it will work on the front differential of LB7 series Duramax models from 2001 to 2004.Here are the measurements I took:- Length (from outside ear to outside ear): 99 mm- Height (from the outside top to the outside bottom): 61 mm- Spline shaft opening: 58 mm across.- Metal bearing cover: inside 58 mm across, outside 92 mm across.The inside measurement of the metal ring cover, which protects the seals and bearings closest to the differential, is 58 mm across. This ring fits over the nub of the outside shaft of the spline. It's fine and fits. However, the outside measurement of this ring is approximately 92 mm. This discrepancy could cause issues and is one of the reasons it has been returned so much. IDKIf you still have your old yoke, you can use a bearing puller to remove and reuse the cover. The old cover measures approximately 86 mm across, which is just enough variance to create potential problems. Once I swapped out the new metal bearing cover with the old one, it mated to the differential housing as it is supposed to; it worked like a charm.Doorman has consistently produced high-quality products, and this yoke is no exception. I am writing this review to help clarify any confusion you might encounter when choosing a product for your needs. It would be helpful if the manufacturer included measurements in the product description.Hope this helps
ERNESTO
April 11, 2025
buen producto se puede adactar
Reed
March 29, 2025
Part G26060975 replaces the lousy seal that comes on this part. Pryed it off w a flathead, install took careful placement of metal & wood to press the new seal on
Customer
January 5, 2025
Working good now rust no leaks
Customer
December 30, 2024
Price was good and available. Less expensive than an OEM part plus it also came with a new seal which is not included from the dealer.I had the exact Dorman part on my truck for years and it would still be good if I didn't ruin it myself.
Recommended Products
$24.13
$ 12 .95 $12.95