Your cart is empty.
Your cart is empty.Jonathan S.
August 7, 2025
Good
Senior
July 22, 2025
I used these hangers on a kids swing set. Using an auger bit, drilled a hole through a 4x6 and attached these hangers. Very sturdy, smooth glide and easy to take apart.
Rob D
April 5, 2025
These are pretty sturdy- the diameter of the thread is 0.37". I did not have any of the mentioned problems with galling/stripping the threads. The nylock nuts aren't super tight, but they come with 2 nuts and 2 washers each so you can jam-nut them together. A good value.
VolGrrl
April 3, 2025
I got these for a large porch swing. I recommend adding some larger washes on both ends to displace the weight even more across the beam.Quick tip for getting lock nuts on quickly. Take out the hook and slide a screw driver through the hole. Use a long socket to get the lock nut as far as you can. Then a regular wrench to finish if socket isn’t long enough. Don’t rotate the socket, rotate the screw driver on the bottom until you are close to done. Then tighten completely using screw driver to hold the hanger in place while you finish tightening.
Kunde
March 15, 2025
Es fehlen zwei Haken!
Harv Hurley
January 5, 2025
Well built, heavy duty! Won’t have to worry about the kids or their parents breaking these mounts! They’ll last for years! I strongly recommend!
Recommended Products