Shopping Cart

Your cart is empty.

Your cart is empty.

CHANCS TYC-50 Low Speed Small Synchronous Electric Motor 110V AC 0.8/1 RPM CW for Hand-Made

4.8 (10) Write Review
Free shipping on orders over $29.99

$11.51

$ 5 .75 $5.75

In Stock

About this item

  • This is a TYC-50 AC 110V 0.8-1RPM CW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly.
  • 【Specification:】 Product Name : Synchronous Motor， Model : TYC-50，Shaft Diameter: 7mm ，Shaft Length: 16mm， Direction : CW， Voltage : AC 110V， Speed : 0.8-1RPM ， Power : 4W， Frequency : 50/ 60Hz，Torque:≤14kg*cm.
  • 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.
  • 【Package Content:】1 x Synchronous Motor
  • 【Attention】 1.The applicable voltage of this motor is AC 110V-130V, too high voltage will burn the motor. 2.The motor speed is not an accurate value, the speed will change with the frequency. For example, the speed is 0.8-1RPM, at 50 Hz, the speed is 0.8RPM; at 60 Hz, the speed is 1RPM.


Product Description

1
1
Speed：

  • 0.8-1RPM
  • 2.5-3RPM
  • 5-6RPM
  • 10-12RPM
  • 15-18RPM
  • 20-24RPM
  • 30-36RPM

This speed is NOT a precise value, this motor is not suitable for precision instruments such as clocks.

Specification:

  • Shaft Diameter: 7mm ；
  • Shaft Length: 16mm；
  • Voltage : 110V；
  • Power : 4W；
  • Frequency : 50/ 60Hz；
Direction：

There are three types of motor steering：

  • CW;
  • CCW;
  • CW/CCW(UNCONTROLLABLE)

1

Small Power Consumption

Minimum power 4W.

1

Low noise, Good Quality

Metal-plastic hybrid gear, less noise, quieter motor operation.

1

Small Size, Big Torque

Motor length 57.5mm, thickness 20.8mm. High torque for DIY.

1

Easy to Install

Small weight, easy to install and use.

1

Canada
August 5, 2025
pour mon projet horloge
Nina Giguère
June 24, 2025
Remplacement d'un module dans un cadre àmouvements
Sourisfirefighter
June 12, 2025
Compact and easy hookup
pricklypearstudio
May 19, 2025
works
Lakeside
April 29, 2025
Don't use for a clock motor! it runs anywhere from 5 to 10 min fast per hour
Robert G
April 2, 2025
TYC-50 0.8/1 RPM CW (clockwise) - My install is simply turning an arm with virtually no load and it is working well for this. I docked a star because it runs hot to the touch, especially considering there is almost no load. How hot? I initially tried to hot glue the motor to my project, but had to drill holes and bolt it on because the glue was being softened by the heat. Advertised RMP is .8-1 and mine turns just over 1 with no load, taking about 53 seconds per rev. It is quiet, but not silent. Runs CW every time it is powered on as advertised. Has 100+ hours on it now, and no issues.
Cls
March 31, 2025
I use this for my dip tank for bamboo rod building. Perfect motor. Very, very slow, which is perfect and allows the varnish to pull off correctly. Has just enough torque to do the job. Like that it is only one directional which is very hard to find.
Lilacmoondragon
March 12, 2025
It worked well but was just a bit slow moving.
Dana Sterling
February 9, 2025
While it did turn in the direction I needed, it rotates slightly faster than 1RPM. For something like a mirror ball, not a big deal. But if you need precise 1RPM motion (which I do... it's in a clock after all), find something else.
Bill W.
January 24, 2025
I found this little motor to be very good as described on the site. I would be happy to promote these supplier .Thank you.