Your cart is empty.
Your cart is empty.This tool is designed for manually threading a drilled hole at a single machine location, without the need to move the workpiece. It ensures precise alignment of the tap and the drilled hole along the identical center-line, maintaining consistent accuracy. The tap holding capacity ranges from 3/32" to 1/4" (2.38 mm to 6.35 mm), providing versatile functionality for various threading applications.
Matt
July 24, 2025
This tap wrench is heavy and well-built, with proper v-jaws and a wide adjustment range as advertised.
Customer
July 20, 2025
Great for getting a tap started. Reasonably well made
Rod S.
June 7, 2025
Works great would recommend a flat edge on the spindle post so when you tighten the small lock screw down it will not twist.
Steven
December 25, 2024
Complicates work flow. Only thing good is you know you’ll be straight in your work and it frees up a hand..
wildcat99s
October 20, 2024
It looks well built, but the chuck that holds the tap was really crooked. When installed in the spindle, the tap had about .25" run out. While everything looks machine cut, the chuck fingers was cut with a hand file. So each one was different and didn't line up which made the tap become crooked. I'm gonna keep it and try to fix it correctly to use on the mill, but if not, i'll use it manually because i needed one anyhow.
Recommended Products
$215.96
$ 71 .28 $71.28